b'Automotive | Engineer InnovationFigure 5: Ball bearing failure is often due to shaft and bearing currentsMagnetic asymmetry happens forSo, my advice as a pioneer, think it several reasons including: poorlythrough before you start and take a designed mechanical structures from agood look at the entire Simcenter magnetic point-of-view; variation inportfolio to make sure that you are magnetic materials from batch to batchcovering all the angles. It is just a (missed in materials testing); insulationprinciple of good engineering. Good faults leading to current leakage; andLuck! npoor current imbalance. To solve this issue in simulation, an NVH structuralwww.plm.automation.siemens.com/model could be examined usingglobal/en/products/simcenter/Simcenter MAGNET and material variation effects could be studied, as could insulation breakdowns. Tools throughout the Simcenter portfolio can be interchanged so that engineers and designers have all the means available to address all these tricky electromagnetic issues and more. 43'