b'Industrial Machinery & Heavy Equipment | Engineer Innovationconsolidate parts on the intake of the duct, thereby significantly reducing itsInjection Molded MJF Part Consolidatedcosts. By transferring the traditional production process from six individual injection molded parts into one single multi-jet fusion printed part thus eliminating the need for assemblyand leakage testing, HP was able to reduce the production cost per part 34.3 %by 34 percent. This was the first HP printer that managed to print one of Cost Reductionits own parts.But coming back to the statement from McKinsey about just scratching at the surface this is not where HP engineers stopped. Their goal was not only to reduce the production cost but at the same time increase the coolingParts: Six Parts: 1performance. Lets take a small detour first. Cost: $29.79 Cost: $19.58Panta rhei - everything flows, is not just an ancient philosophic buzzword: If you carefully look around you, you willstreamlined nose shape to move fast realize there are fluids and flow allthrough the water. Eagles have evolved around us and there are amazingwinglets to optimize flight efficiency. solutions from nature to tackle theOver decades rivers found the best associated flow problems. For sharks,possible ways through a given evolution came up with an amazinglyenvironment thereby shaping terrain 33'